Green fabric
Stitch Witchery
Floral wire
Green wire edge ribbon
Pinecones
Ruler
Chalk

Scissors
Glue Gun
Iron

1. Measure tabletop. Cut fabric 18 inches wide and three feed longer than your tabletop.
2. Lay fabric face down.
3. Fold both long sides in one inch. Iron to crease. Insert Stitch Witchery into fold and re-iron the fabric to create seam. It is best to let the Stitch Witchery cool for a few minutes between steps.
4. Fold the cloth in half lengthwise and use a ruler to draw a triangle on the edge of the fabric.
5. Cut triangle and open fabric. Cut a small slit into the point of the triangle and fold exposed edges. Insert Stitch Witchery and iron to create seam.
6. Wrap wire around large end of pinecone, leaving a few inches to come out at the top. Attach the pinecone to the end of the runner by gluing the wire to the back of a point of the fabric.
7. Tie a bow around the wire with a decorative ribbon and repeat on remaining points of the runner.
8. Another piece of wire can be used to center the pinecone at the points if necessary.